Speed Controller SPD-601000A Installation and Wiring

Rated Voltage   24-60 Volts DC
Rated For Motors   24-36 Volts Up To 700 Watts
 48-60 Volts Up To 1000 Watts
Maximum Current   24 Volts 40 Amps
 36 Volts 35 Amps
 48 Volts 30 Amps
 60 Volts 25 Amps
Conversion Efficiency   95%
Under Voltage Protection   20.5 Volts
Recommended Fuse/Circuit Breaker Size   24 Volts 45 Amps
 36 Volts 40 Amps
 48 Volts 35 Amps
 60 Volts 30 Amps
Dimensions   4" x 4-1/4" x 2" (L x W x H)
Throttle   3 Wire Hall-Effect Throttle (Included)

*Power Connector
Red = Positive
Black = Negative


12 Gauge Wire


Required Connection

Motor Connector
Red = Positive
Blue = Negative


12 Gauge Wire


Required Connection

Throttle Connector (On Controller)
Blue = + 1-4 Volts Input
Red = + 5 Volts Output
Black = -Negative


Mating Connector Item # CNX-150


Required Connection
*The power should be the last connection made.
*Power switch or power contactor and fuse or circuit breaker needs to be installed between the speed controller and battery pack.