Parts  Repair Help  Contact Us  Shopping Cart  My Account  Projects 

Hardware > Nuts, Washers, and Bolts

Nuts, Washers, and Bolts

Browse for hardware by vehicle make and model.

Looking for axle nuts, axle spacer washers, axle torque washers, or other axle hardware?

We carry these parts on our Axle Hardware Page.



Nut and Washer for 8mm Left Hand Thread Motor Shafts
Sprocket nut and washer for electric scooter, pocket bike, and go kart motors with 8mm left hand threaded shaft ends. Fits MY1016, MY1020, and ZY1020 motors. Fits 6812, MY6812, and MY6812B motors with 9 or more tooth sprockets.
Item # SPR-NW8

$1.95


Lock Nut and Washer for 8mm Left Hand Thread Motor Shafts
Sprocket lock nut and washer for motors with 8mm left hand threaded shaft ends. Fits MY1016, MY1020, and ZY1020 motors. Fits 6812, MY6812, and MY6812B motors with 9 or more tooth sprockets.
Item # SPR-NW8-LK

$2.49


Nut and Spacer for 6mm Left Hand Thread Motor Shafts
Sprocket nut and spacer for electric scooter motors with 6mm left hand threaded shaft ends. Fits 6812, MY6812, and MY6812B motors with 7 tooth sprockets.
Item # SPR-NS6

$1.95


Nut with Built-In Lock Washer for Keyed Motor Shaft Sprockets
Motor shaft nut for gear motors with 11mm OD keyed shafts. Compatible with MY1016Z, MY1016Z3, and MY1018Z gear motors.
Item # NUT-8RW

$0.95


6mm x 12mm Sprocket, Wheel, and Motor Hex Socket Head Bolt
6mm hex socket head bolt that is compatible with many rear wheel sprockets, wheels, and motors. This bolt has 12mm long M6x1.0 right-hand clockwise threads.
Item # HDW-B612

$0.50


6mm x 16mm Sprocket, Wheel, and Motor Hex Socket Head Bolt
6mm hex socket head bolt that is compatible with many rear wheel sprockets, wheels, and motors. This bolt has 16mm long M6x1.0 right-hand clockwise threads.
Item # HDW-B616

$0.50


6mm x 20mm Sprocket, Wheel, and Motor Hex Socket Head Bolt
6mm hex socket head bolt that is compatible with many rear wheel sprockets, wheels, and motors. This bolt has 20mm long M6x1.0 right-hand clockwise threads.
Item # HDW-B620

$0.50


Sprocket To Freewheel Nut & Bolt Set, Stainless Steel
High quality stainless steel nut and bolt set for attaching freewheel clutch item # FWM-100 and FWM-125 to compatible rear wheel sprockets item # SPR-2555, SPR-2565S, SPR-2580, and SPR-844. This set includes four stainless steel bolts and four stainless steel locknuts.
Item # HDW-100
$2.95


Set of 2 Disc Brake Caliper Mounting Bolts
Set of two disc brake caliper mounting bolts with built-in washer and pre-applied blue threadlock. Compatible with all of the disc brake calipers sold on this page.

5mm Hex (Allen) Bolt Head

Pre-Applied Blue Threadlock

6mm (M6x1.0) Diameter Threads

18mm Long Threads

Made from Hardened High Strength Steel

Black Powder Coated Anti-Corrosion Finish

Item # BRK-794

$1.00


Disc Brake Caliper Mounting Bolt Tool
Disc brake caliper mounting bolt tool. This is a standard 5mm Allen (hex) wrench. Compatible with BRK-794 mounting bolts sold above.

5mm Hex (Allen) Tool Head

Made from CR-V High Strength Tool Steel

Hardened To Rockwell HRC 56-58

Item # BRK-798
$0.50


Set of Six 5mm Disc Brake Rotor Mounting Bolts
Set of six 5mm disc brake rotor mounting bolts. These bolts have pre-applied blue threadlock on them to securely keep them in place.

T25 Bolt Head

Pre-Applied Blue Threadlock

5mm (M5x0.6) Diameter Threads

10mm Long Threads

Made from Hardened High Strength Steel

Black Powder Coated Anti-Corrosion Finish

Item # BRK-590
$1.00


T25 Disc Brake Rotor Mounting Bolt Tool
Disc brake rotor mounting bolt tool with dual T25 ends. Made from hardened high strength chrome-vanadium steel. 

T25 Tool Head

Made from CR-V High Strength Tool Steel

Hardened To Rockwell HRC 56-58

Item # BRK-593
$1.00


Set of Three 6mm Disc Brake Rotor Mounting Bolts
Set of three 6mm disc brake rotor mounting bolts.

4mm Hex (Allen) Bolt Head

6mm (M6x1.0) Diameter Threads

16mm Long Threads

Made from Grade 304 Stainless Steel

Item # BRK-595
$1.00


4mm Hex (Allen) Disc Brake Rotor Mounting Bolt Tool
Disc brake rotor mounting bolt tool with 4mm hex (Allen) ends. Made from hardened high strength chrome-vanadium steel.

4mm Hex (Allen) Tool Head

Made from CR-V High Strength Tool Steel

Hardened To Rockwell HRC 56-58
Item # BRK-598

$0.50


Shock Absorber Mounting Nut and Bolt
Shock absorber mounting nut and bolt for electric scooters, bikes, and go-karts.

Fits 8mm ID x 24mm Long Shock Sleeves

Nut Shaft: 7.9mm OD x 28.5mm Long

Nut and Bolt Heads: 13.5mm OD

5mm Hex Wrench Required to Remove/Install

Item # SHK-105

$2.95


Shock Absorber Mounting Sleeve and Spacers
Shock absorber mounting sleeve with two nylon spacers for electric scooters, bikes, and go-karts.

Sleeve: 12mm OD x 8mm ID x 24mm Long

Spacers: 12mm ID x 18mm OD x 5mm Thick

Item # SHK-130

$2.95


Set of Two 5mm x 12mm Metric Machine Screws with Flat Washers, Lock Washers, and Nuts
Set of two 5mm OD x 12mm long zinc plated steel pan head machine screws with flat washers, lock washers, and nuts. Recommended drill bit size is 13/64" or 5mm.
Item # HDW-M5X12SET
$0.65


Set of two 5mm x 25mm Metric Machine Screws with Flat Washers, Lock Washers, and Nuts
Set of two 5mm OD x 25mm long zinc plated steel pan head machine screws with flat washers, lock washers, and nuts. Recommended drill bit size is 13/64" or 5mm.
Item # HDW-M5X25SET
$0.75


Set of Four 6mm x 12mm Metric Machine Screws with Flat Washers, Lock Washers, and Nuts
Set of four 6mm OD x 12mm long zinc plated steel pan head machine screws with flat washers, lock washers, and nuts. Recommended drill bit size is 1/4" or 6mm.
Item # HDW-M6X12SET
$1.49


Set of four 6mm x 25mm Metric Machine Screws with Flat Washers, Lock Washers, and Nuts
Set of four 6mm OD x 25mm long zinc plated steel pan head machine screws with flat washers, lock washers, and nuts. Recommended drill bit size is 1/4" or 6mm.
Item # HDW-M6X25SET
$1.59


Battery Terminal Mounting Hardware for T4 Nut and Bolt Terminals
Set of two nuts, bolts, flat washers, and lock washers. Enough wire terminal mounting hardware for one battery. For batteries with T4 nut and bolt terminals. The threaded area of the bolts in this hardware set is 5mm OD. Compatible with BAT-12V18A and BAT-12V22A.
Item # HDW-BAT1
$1.00


Rear Axle Tension Adjuster
Rear axle tension adjuster for the rear wheel of electric scooters and bikes. Fit 10mm OD axles.
Dimension: 1-7/8" long x 1" wide including hardware.
Item # HDW-125
$2.95


Rear Axle Tension Adjuster
Rear axle tension adjuster for the rear wheel of electric scooters and bikes. Fit 10mm OD axles.
Dimension: 2-5/8" long x 1" wide including hardware.
Item # HDW-126
$2.95


Front Axle Retainer for 8mm Axle
Nickel plated steel front axle retaining washer. For  8mm (~5/16") axle.
Item # HDW-138
$0.95


Front Axle Retainer for 10mm Axle
Nickel plated steel front axle retaining washer. For 10mm (~3/8") axle.
Item # HDW-140
$0.95


Front Axle Retainer for 12mm Axle
Nickel plated steel front axle retaining washer. For 12mm (~1/2") axle.
Item # HDW-142
$0.95

Handlebar Thumbscrew
Small thumbscrew with black plastic knob for folding electric scooter handlebars.
Item # HDW-132
$1.95


Folding Handlebar Knob for Razor® E100, E125 & E150 Electric Scooter
Folding handlebar replacement knob for the Razor® E100, E125 & E150 electric scooters.
Item # HDW-130
$6.95


Deck Screw for Currie®, eZip®, and IZIP® Electric Scooters
Deck screw with washers for Currie®, eZip®, and IZIP® electric scooters.
Item # CTE-24478
$1.95


Handlebar Tightening Bolt and Wedge for Currie®, eZip®, and IZIP® Electric Scooters
Handlebar tightening bolt and wedge for Currie®, eZip®, and IZIP® electric scooters. Bolt is 135mm long x 8mm OD. Wedge is 25mm OD.
Item # HDW-350
$10.95



"When you need Electric Scooter Parts, go to: ElectricScooterParts.com"

 

Store Polices | Electric Scooter Repair Help | Dealer Discounts | Feedback | About Us

 

We carry nuts, washers, and bolts for electric scooters, electric mopeds, and electric bikes.

 

We Ship Internationally

             
Copyright© 2002-2020 by ElectricScooterParts.com, an Electricruz Inc. company. All rights reserved.