|
Speed Controller SPD-36650A Installation and Wiring |
|
| Rated Voltage | 36 Volts |
| Rated For Motors | Up To 500 Watts |
| Maximum Current | 25 Amps |
| Rated For Chargers | Up To 3 Amps |
| Conversion Efficiency | 95% |
| Under Voltage Protection | 31 Volts |
| Under Voltage Battery Protection:
When the battery pack falls below a specific Voltage the controller
turns the motor off preventing over discharging of the battery pack
which extends the battery packs lifespan. (The cutoff value is
approximately 31.0 Volts ± 1.0 Volts) Motor Cut-Off During Braking: When the brakes are engaged the brake switch signals the controller to turn off the motor. |
| Power
Connector Mating Connector Item # CNX-50 |
 |
|---|---|
| Motor
Connector Mating Connector Item # CNX-50 |
|
| Key Switch
Connector Mating Connector Item # CNX-51 |
 |
| Throttle
Connector Mating Connector Item # CNX-52 |
|
| Charger
Connector Mating Connector Item # CNX-51 |
 |
| Brake Lever
Switch Connector Mating Connector Item # CNX-51 |
 |
| Power Light
Connector Mating Connector Item # CNX-51 |
 |
| Brake Light
Connector Mating Connector Item # CNX-51 |
|
5 pin throttle is used on Schwinn, IZIP, and Mongoose electric scooters