Speed Controller SPD-602000A Installation and Wiring

Rated Voltage   48-60 Volts DC
Rated For Motors   48-60 Volts Up To 2000 Watts
Continuous Current Rating   50 Amps
Maximum Current Rating   None (Unlimited)
Recommended Fuse/Circuit Breaker Size   Depends on Application
Dimensions   4" x 4-3/8" x 1-3/4" (L x W x H)
Throttle   3 Wire Hall-Effect Throttle (Included)

*Power Connector
Red = Positive
Black = Negative


12 Gauge Wire


Required Connection

Motor Connector
Red = Positive
Yellow/Green = Negative


12 Gauge Wire


Required Connection

Throttle Connector

(Built Into Controller)

1 = +5 Volts Output

2 = +1-4 Volts Input

3 = -Negative


Mating Connector Item # CNX-150
Required Connection

*The power should be the last connection made.
*Power switch or power contactor and fuse or circuit breaker need to be installed between the speed controller and battery pack.