Curtis 1505 Speed Controller Specifications

Speed Controller SPD-1505 Installation and Wiring

CURTIS MODEL	VOLTAGE	1 MIN. RATING	CONTINUOUS RATING	TYPICAL VOLTAGE DROP AT 20A	UNDER VOLTAGE
1505	24 Volts	80 Amps	20 Amps	.40 Volts	18 Volts

- Controls the speed of one or two electric motors.
- Requires a minimum of 18 Volts DC to operate.
- Requires a 5k Ohm throttle or potentiometer.
- Complete all connections prior to hooking up the battery pack.
- The key switch circuit must be "on" for controller to operate.
- The EPO circuit is optional. If installed the EPO circuit must be "off" for the controller to operate.