|
|
IZIP Scooter Parts > IZIP 36 Volt I-750 Electric Scooter Parts
IZIP® I-750 (36 Volt Version) Electric Scooter Parts
|
Battery Set for IZIP® I-750 Electric Scooter (36 Volt Version)
Three 12 Volt 10h batteries for the IZIP® I-750 electric scooter (36 Volt
version). Includes 12 month battery replacement warranty.
Warranty Details
Item # I750-BATTERIES | $107.85
 |
|
|
Battery Pack with Case and Wiring Harness for IZIP® I-750 Electric
Scooter (36 Volt Version)
Plug-and-play battery pack for the IZIP® I-750 electric scooter (36 Volt
version). Includes
three 12 Volt 10Ah pre-wired batteries, heavy-duty woven nylon zippered soft case with built-in handle, and pre-installed wiring
harness. Fully assembled and ready to use. Includes 12 month battery replacement warranty.
Warranty Details
Item # BAT-3610PK |
$159.95
|
|
|
Battery Charger for IZIP® I-750 Electric Scooter (36 Volt Version)
Battery charger for the IZIP® I-750 electric scooter (36 Volt version).Charger rating: 36 Volt, 1.6 Amp
Item # CHR-36V1.6AXLR |
$32.95
|
|
6-Wire Throttle for IZIP® I-750 Electric
Scooter (36 Volt Version)
Throttle for the IZIP® I-750 electric scooter (36 Volt version). For IZIP® I-750 scooters with six-wire throttles.
Item # THR-600 |
$44.95
|
|
 |
Fuse for IZIP® I-750 Electric Scooter (36 Volt Version)
Fuse for the IZIP® I-750 electric scooter (36 Volt version). Fuse rating: 40 Amp
Item # FUS-ATO40 |
$.95
|
CURRIE-AXLEHARDWARE
CTE-24610
|
|
Axle Nut for IZIP® I-750 Electric Scooter (36 Volt Version)
Front and rear wheel axle nut for the IZIP® I-750 electric scooter (36 Volt version).
Item # CTE-24610
|
$1.95
|
CTE-24612
|
|
Axle Lock Nut for IZIP® I-750 Electric Scooter (36 Volt Version)
Front and rear wheel axle lock nut for the IZIP® I-750 electric scooter (36 Volt version).
Item # CTE-24612
|
$1.49
|
|
|
Motor Sprocket Roll Pin for IZIP® I-750 Electric Scooter (36 Volt Version)
Motor sprocket roll pin for IZIP® I-750 electric scooter (36 Volt version). Attaches sprocket onto motor shaft.
Item # HDW-3MMRP
|
$0.95
|
SPR-2589F
|
|
Upgrade Rear Sprocket for IZIP® I-750 Electric Scooter (36 Volt Version)
Upgrade rear wheel sprocket with freewheel for the IZIP® I-750 electric scooter (36 Volt version). Directly replaces and upgrades the SPR-2590 sprocket listed below.
This upgrade sprocket has a freewheel that provides less rolling resistance when coasting for improved range and ride time plus makes it easier to push or kick the scooter forward when not using the motor.
Item # SPR-2589F |
$39.95
|
SPR-2590
|
|
Rear Sprocket for IZIP® I-750 Electric Scooter (36 Volt Version)
Original rear wheel sprocket for the IZIP® I-750 electric scooter (36 Volt version).
We have an upgrade rear sprocket with freewheel listed above that provides improved range and performance compared to this original sprocket.
Item # SPR-2590 |
$59.95
|
|
|
Semi-Metallic Brake Pad Set for BRK-480L and BRK-480R Disc Brake Calipers
Replacement disc brake pads for BRK-480L
and BRK-480R disc brake caliper. Semi-metallic friction material.
Item # BRK-480P
Does not replace this scooter's original brake pads.
If the original brake pads are needed then purchase BRK-480R disc brake caliper to replace the
original caliper with a modern version that brake pads are available for.
|
$9.95
|
CURRIE-SEATS
SET-185
SET-249
SET-200
CURRIE-SEATPOSTS
SPT-150
|
Steel Seat Post for IZIP® I-750 Electric Scooter (36 Volt Version)
Steel seat post with chrome finish for the IZIP® I-750 electric scooter (36 Volt version).
Item # SPT-150 |
$8.95
|
SPT-161
|
Aluminum Seat Post for IZIP® I-750 Electric Scooter (36 Volt Version)
Lightweight aluminum alloy seat post for the IZIP® I-750 electric scooter (36 Volt version).
Item # SPT-161 |
$9.95
|
SPT-300
|
Seat Tube for IZIP® I-750 Electric Scooter (36 Volt Version)
Seat tube with seat post clamp for the IZIP® I-750 electric scooter (36 Volt version).
Installation requires a seat tube base for this seat tube to mount into. 15-1/2"
long x 25.4mm (1") ID x 28.8mm (1-1/8") OD.
Item # SPT-300 |
$22.95
|
LIT-140
|
|
5000 Lumen 7 LED Ultra-Bright Headlight for IZIP® I-750 Electric Scooter (36 Volt Version)
Super bright 5000 lumen rechargeable LED headlight set for the IZIP® I-750 electric scooter (36 Volt version).
Machined aluminum and glass headlight construction with premium build quality. Lighted push button switch on back of light
activates three different power modes: normal, high, and flashing. Normal power mode is bright and suitable
for most riding conditions. High power mode is super bright and suitable for higher speed riding and
off-road trails. In flashing mode this light quickly blinks on and off. Includes adjustable headband
to optionally use for wearing on your head instead of installing on the
handlebar, 5000 lumen seven LED headlight, handlebar and headband rubber mounting bands, 110-240VAC universal
battery charger, and a 9600mAh 8.4 Volt rechargeable lithium-ion battery in a black nylon carry case with Velcro mounting straps.
The battery lasts around 3 hours on low mode and 2 hours on high mode and takes 1-5 hours to fully recharge depending on how long the light was on for.
Installation Directions
Item # LIT-140 |
$29.95
|
BEL-300
|
|
Safety Warning Bell for IZIP® I-750 Electric Scooter (36 Volt Version)
Safety warning bell.Pleasant sounding and attention grabbing chime bell sound lets others know that you are on the road in a friendly yet effective way.
Item # BEL-300 |
$2.95
|
BEL-360
|
|
Safety Warning Bell With Compass for IZIP® I-750 Electric Scooter (36 Volt Version)
Compass bell for the IZIP® I-750 electric scooter (36 Volt version). Pleasant sounding and attention grabbing chime bell sound. Easy to view real magnetic compass. Easy to install design.
Item # BEL-360 |
$3.95
|
VXT-160
VXT-714
GSL-4OZ
|
|
Green Slide® Chain Lube for IZIP® I-750 Electric Scooter (36 Volt Version)
Green Slide® safe and biodegradable chain lube. The perfect lube for electric scooters and bikes. Made from highly modified tree and plant oils with all natural cling and anti-oxidation additives.
4 fluid ounce / 120 ml bottle. More Information
Item # GSL-4OZ |
$4.95
|
TIR-SL8
|
Semi-Metallic Versus Sintered Metallic
