1-800-908-8082

 
8am-5pm Pacific Time Monday-Friday

PartsRepair HelpContact UsShopping CartMy AccountStore PoliciesProjects

Search This Site

Browse by Vehicle Make and Model

All Makes & Models

Browse All Parts

Accessories
Axles
Batteries
Battery Chargers
Battery Harnesses
Bearings
Belts
Brakes
Brake Cables
Brakes Levers
Bulbs
Chain
Chargers
Charger Ports
Connectors
Controllers
Circuit Breakers
Drive Belts
Forks
Freewheels
Fuses
Fuse Holders
Grips
Handlebars
Hardware
Headlights
Horns
Inner Tubes
Key Switches
Kickstands
Kits
Lighting
Meters
Mirrors
Motors
Relays
Rims
Shock Absorbers
Seats
Seat Posts
Speed Controllers
Sprockets
Switches
Taillights
Throttles
Tires
Tools
Tubes
Turn Signals
Voltage Converters
Wheels
Wire
Wire Connectors

New Parts

 

Hardware

Browse for hardware by vehicle make and model.



Nut and Washer for 8mm Left Hand Thread Motor Shafts
Sprocket nut and washer for electric scooter, pocket bike, and go kart motors with 8mm left hand threaded shaft ends. Fits MY1016, MY1020, and ZY1020 motors. Fits 6812, MY6812, and MY6812B motors with 9 or more tooth sprockets.
Item # SPR-NW8

$1.95


Nut and Spacer for 6mm Left Hand Thread Motor Shafts
Sprocket nut and spacer for electric scooter motors with 6mm left hand threaded shaft ends. Fits 6812, MY6812, and MY6812B motors with 7 tooth sprockets.
Item # SPR-NS6

$1.95


Nut with Built-In Lock Washer for Keyed Motor Shaft Sprockets
Motor shaft nut for gear motors with 11mm OD keyed shafts. Compatible with MY1016Z, MY1016Z3, and MY1018Z gear motors.
Item # NUT-8RW

$0.95


3mm x 20mm Roll Pin for Chain Sprockets
3mm x 20mm roll pin for Currie, eZip, and IZIP chain sprockets. Attaches chain sprocket onto motor shaft.
Item # HDW-3MMRP

$0.95


Sprocket To Freewheel Nut & Bolt Set, Stainless Steel
High quality stainless steel nut and bolt set for attaching freewheel clutch item # FWM-100 and FWM-125 to compatible rear wheel sprocket item # SPR-2555, SPR-2565S, SPR-2580, and SPR-844. This set includes four stainless steel bolts and four stainless steel locknuts.
Item # HDW-100
$2.95


Rear Axle Tension Adjuster
Rear axle tension adjuster for the rear wheel of electric scooters and bikes. Fit 10mm axles.
Dimension: 1-7/8" long x 1" wide including hardware.
Item # HDW-125
$2.95


Rear Axle Tension Adjuster
Rear axle tension adjuster for the rear wheel of electric scooters and bikes. Fit 10mm axles.
Dimension: 2-5/8" long x 1" wide including hardware.
Item # HDW-126
$2.95


Front Axle Retainer [8mm]
Nickel plated steel front axle retaining washer.  Fits axles up to 8mm (~5/16") diameter.
Item # HDW-138
$0.95


Front Axle Retainer [10mm]
Nickel plated steel front axle retaining washer. Fits axles up to 10mm (~3/8") diameter.
Item # HDW-140
$0.95


Front Axle Retainer [12mm]
Blackened steel front axle retaining washer. Fits axles up to 12mm (~1/2") diameter.
Item # HDW-142
$0.95


Mounting Hardware for Band Brakes
Universal fit mounting hardware for band brakes.
Item # HDW-188
$3.95


250W/450W Gear Motor Bracket with Mounting Hardware for Electric Bicycles
Mounting bracket for 250 and 450 Watt gear motors. Includes mounting hardware. Designed to mount 250 and 450 Watt gear motors onto the seatstay and chainstay of most bicycle frames.
Item # HDW-250
Compatible Motors: MOT-24250G, MOT-24450G, MOT-36250G, and MOT-36450G.
$9.95


Brake Cable Adjuster
Nickel plated steel brake cable adjusting barrel with adjustment stop nut. 25mm long x 8mm wide overall measurements. Fits brake cable ends up to 6mm wide. Threaded area of adjuster is 18mm long. M6 x 1 threads (6mm OD x 1mm pitch).
Item # BRK-227
$0.95


Brake Cable Stopper
Nickel plated steel adjustable brake cable stopper.
Item # BRK-215
$.95


Brake Cable Stopper
Zinc plated steel adjustable brake cable stopper.
Item # BRK-220
$.95


Small Brake Cable Stopper
Nickel-plated steel adjustable brake cable stopper for most caliper brakes. Fits 6mm (1/4") ID hole with two flat spots.
Item # BRK-225
$.85


Large Brake Cable Stopper
Nickel-plated steel adjustable brake cable stopper for most band brakes. Fits 7mm (5/16") ID hole with two flat spots.
Item # BRK-226
$.95


Cable Clamp with 0.122 Inch (3.1mm) ID
Steel cable clamp. Connects two cables together. 0.122" (3.1mm) ID x 0.315" (8mm) OD. Made from nickel plated steel. Includes socket set screw. Set screw requires 1.5mm Allen (hex) wrench to tighten and loosen.
Item # CCL-122
$0.85


Cable Clamp with 0.161 Inch (4.1mm) ID
Steel cable clamp. Connects two cables together. 0.161" (4.1mm) ID x 0.35" (9mm) OD. Made from nickel plated steel. Includes socket set screw. Set screw requires 1.5mm Allen (hex) wrench to tighten and loosen.
Item # CCL-161
$0.95


1.5mm Allen (Hex) Wrench
1.5mm Allen wrench. This type of wrench is also called a hex key. Made from hardened steel. The overall dimensions of this wrench are 1-7/8" long x 3/4' wide x 1.5mm thick.
Item # WRN-A1.5MM
$0.25

Brake Cable End Cap
Crimp-on aluminum brake cable end cap. Prevents brake cables from unraveling on end. Makes brake cable installations look neat and professional.
Item # BRK-205
$.20

Brake Cable Housing Ferrule
Crimp-on Nickel plated steel brake cable housing ferrule.
Item # BRK-204
$.20


Set of Two 5mm x 12mm Metric Machine Screws with Flat Washers, Lock Washers, and Nuts
Set of two 5mm OD x 12mm long zinc plated steel pan head machine screws with flat washers, lock washers, and nuts. Recommended drill bit size is 13/64" or 5mm.
Item # HDW-M5X12SET
$0.65


Set of two 5mm x 25mm Metric Machine Screws with Flat Washers, Lock Washers, and Nuts
Set of two 5mm OD x 25mm long zinc plated steel pan head machine screws with flat washers, lock washers, and nuts. Recommended drill bit size is 13/64" or 5mm.
Item # HDW-M5X25SET
$0.75


Set of Four 6mm x 12mm Metric Machine Screws with Flat Washers, Lock Washers, and Nuts
Set of four 6mm OD x 12mm long zinc plated steel pan head machine screws with flat washers, lock washers, and nuts. Recommended drill bit size is 1/4" or 6mm.
Item # HDW-M6X12SET
$1.49


Set of four 6mm x 25mm Metric Machine Screws with Flat Washers, Lock Washers, and Nuts
Set of four 6mm OD x 25mm long zinc plated steel pan head machine screws with flat washers, lock washers, and nuts. Recommended drill bit size is 1/4" or 6mm.
Item # HDW-M6X25SET
$1.59


Key Lock With Two Keys for Trunks and Battery Covers
Lock for electric scooter and bike trunks and battery covers. Includes mounting nut. Mounts into 18mm (11/16") diameter opening. Offset latch is backset 22mm (7/8") from the rear side of the mounting bezel. Latch is 48mm (1-7/8") long from end to end.
Item # HDW-95
$5.95


Key Lock With Two Keys for Trunks and Battery Covers
Lock for electric scooter and bike trunks and battery covers. Includes mounting nut and rubber gasket. Mounts into 19mm (3/4") diameter opening. Offset latch is backset 25.4mm (1") from the rear side of the mounting bezel. Latch is 37mm (1-7/16") long from end to end.
Item # HDW-96
$9.95


Handlebar Mount Water Bottle Holder
Aluminum handlebar mount water bottle holder. Fits standard 7/8" OD electric scooter and bicycle handlebars. Includes protective plastic strip to protect handlebars. Easy to install two piece design. Handlebar grips and brake levers do not need to be removed for installation.
Item # HDW-H20
$5.95


Handlebar Mount D-Cell Flashlight Holder
Turns any standard d-cell flashlight into a scooter or bicycle headlight. Heavy-duty chrome plated all-steel construction. Easy to install two piece design. Handlebar grips and brake levers do not need to be removed for installation.
Item # LIT-630
$2.95

Handlebar Thumbscrew
Small thumbscrew with black plastic knob for folding electric scooter handlebars.
Item # HDW-132
$1.95


Folding Handlebar Knob for Razor® E100, E125 & E150 Electric Scooter
Folding handlebar replacement knob for the Razor® E100, E125 & E150 electric scooters.
Item # HDW-130
$6.95


30mm Quick Release Seat Post Clamp
Quick release aluminum seat post clamp for 25.4mm (1") OD seat posts. Inside diameter of clamp is adjustable between 30mm (1-3/16") and 28mm (1-1/16").
Item # CLP-300
$7.95


30mm Seat Post Clamp
Allen wrench adjustable aluminum seat post clamp for 25.4mm (1") OD seat posts. Inside diameter of clamp is adjustable between 30mm (1-3/16") and 28mm (1-1/16").
Item # CLP-301
$3.95


31.8mm Quick Release Seat Post Clamp
Quick release aluminum seat post clamp for 28.6mm (1-1/8") OD seat posts. Inside diameter of clamp is adjustable between 31.8mm (1-1/8") and 30mm (1-3/16").
Item # CLP-318
$5.95


31.8mm Quick Release Seat Post Clamp
Quick release aluminum seat post clamp for 28.6mm (1-1/8") OD seat posts. Fits Currie®, eZip®, and IZIP® electric bicycles. Inside diameter of clamp is adjustable between 31.8mm (1-1/8") and 30mm (1-3/16").
Item # CTE-24464
$12.95


Seat Post Quick Release for Currie®, eZip®, and IZIP® Electric Bicycles
Seat post quick release mechanism for Currie®, eZip®, and IZIP® electric bicycles.
Item # CTE-24450
$12.95


Battery Rack Lock for Currie® RMB Electric Bicycles
Replacement battery rack lock set with four keys for Currie® IZIP® RMB electric bicycles and electric bicycle kits with detachable side-mounted battery packs.
Item # HDW-RMB002
$22.95


Deck Screw for Currie®, eZip®, and IZIP® Electric Scooters
Deck screw with washers for Currie®, eZip®, and IZIP® electric scooters.
Item # CTE-24478
$1.95


Kickstand for IZIP®, eZip®, and Schwinn® Electric Scooters
Black enameled steel 2" kickstand for IZIP®, eZip®, and Schwinn® electric scooters.
Item # CTE-24482
$7.95


Kickstand for IZIP®, eZip®, and Schwinn® Electric Scooters
Black enameled steel 4" kickstand for IZIP®, eZip®, and Schwinn® electric scooters.
Item # CTE-24483
$14.95


Kickstand for IZIP®, eZip®, and Schwinn® Electric Scooters
Black enameled steel 6" kickstand for IZIP®, eZip®, and Schwinn® electric scooters.
Item # CTE-24484
$16.95


Handlebar Tightening Bolt And Wedge Currie®, eZip®, and IZIP® Electric Scooters
Handlebar tightening bolt and wedge for Currie®, eZip®, and IZIP® electric scooters.
Item # HDW-350
$10.95


Handlebar Quick-Release Mechanism for Currie®, eZip®, and IZIP® Electric Scooters
Folding handlebar quick-release mechanism for Currie®, eZip®, and IZIP® electric scooters.
Item # CTE-QRM
$6.95


Quill Stem for eZip® and IZIP® Electric Bicycle
Adjustable aluminum alloy quill stem for eZip® and IZIP® electric bicycles.
Item # CTE-24462
$22.95


Quill Stem for Currie®, eZip®, and IZIP® Electric Bicycles
Quill stem for Currie®, eZip®, and IZIP® electric bicycles. 110mm long x 1-1/8" OD quill.
Item # CTE-24458
$19.95


Kickstand for Currie® Electric Bicycles
Kickstand for Currie®, eZip®, and IZIP® electric bicycles.
Item # CTE-24388
$17.95


Rear Derailleur for Currie®, eZip®, and IZIP® Electric Bicycles
Rear derailleur with frame mounting bolt for Currie®, eZip®, and IZIP® electric bicycles. Premium quality Shimano® aluminum alloy derailleur. Original equipment replacement part.
Item # CTE-24432
$59.95


Rear Derailleur for Electric Bicycles
Falcon® TD-One® nickel plated steel rear derailleur. Fits 3/8" OD rear axles. Replaces rear axle mounted derailleur only. Not compatible with Currie®, eZip®, and IZIP® electric bicycles which use frame mounted derailleur.
Item # DRL-100
$12.95


Front Derailleur for Electric Bicycles
Falcon® TD-One® nickel plated steel front derailleur. Bottom pull shifting mechanism. Fits bicycle frames with 28.6mm OD seat tubes.
Item # DRL-105
$9.95


Motor Guard for Chain Drive eZip® and IZIP® Electric Scooters
Motor guard protector for chain drive Currie®, eZip®, and IZIP® electric scooters.
Item # CTE-MOTORGUARD
$14.95


Motor Guard for Direct Drive eZip® and IZIP® Electric Scooters
Motor guard for Currie®, eZip®, and IZIP® electric scooters with direct drive motors.
Item # CTE-24476
$14.95

Order Online or Phone Toll-Free

1-800-908-8082





"When you need Electric Scooter Parts, go to: ElectricScooterParts.com"

 

Electric Scooter Repair Help | Electric Scooter Laws | Dealer Discounts | Feedback | About Us

 

We Ship Internationally

             
Copyright© 2002-2018 by ElectricScooterParts.com, an Electricruz Inc. company. All rights reserved.