PartsRepair HelpContact UsShopping CartMy AccountStore PoliciesProjects

 

New Electric Scooter Parts

Recently Added Electric Scooter Parts and Accessories


Green Slide Chain Lube
Green Slide safe and biodegradable chain lube. The perfect lube for electric scooters and bikes. Made from highly modified tree and plant oils with all natural cling and anti-oxidation additives.
4 fluid ounce / 120 ml bottle. More Information
Item # GSL-4OZ

$4.95


24 Tooth 2-1/8" Bore 5-Hole Sprocket for 1/2"x1/8" and 1/2"x3/32" Bicycle Chain
24 tooth bicycle chain sprocket. Black powder coated finish steel. Dimensions 4-5/8" OD, 2-1/8" ID. Five 5.1mm ID mounting holes. Mounts onto our 5-hole freewheels sold below. Compatible with both 1/2"x1/8" (#410) and 1/2"x3/32" bicycle chain.
Item # SPR-B24F

 $19.95


30 Tooth 2-1/8" Bore 5-Hole Sprocket for 1/2"x1/8" and 1/2"x3/32" Bicycle Chain
30 tooth bicycle chain sprocket. Black powder coated finish steel. Dimensions 5" OD, 2-1/8" ID. Five 5.1mm ID mounting holes. Mounts onto our 5-hole freewheels sold below. Compatible with both 1/2"x1/8" (#410) and 1/2"x3/32" bicycle chain.
Item # SPR-B30F

 $22.95


32 Tooth 2-1/8" Bore 5-Hole Sprocket for 1/2"x1/8" and 1/2"x3/32" Bicycle Chain
32 tooth bicycle chain sprocket. Black powder coated finish steel. Dimensions 5-1/4" OD, 2-1/8" ID. Five 5.1mm ID mounting holes. Mounts onto our 5-hole freewheels sold below. Compatible with both 1/2"x1/8" (#410) and 1/2"x3/32" bicycle chain.
Item # SPR-B32F

 $23.95


40 Tooth 2-1/8" Bore 5-Hole Sprocket for 1/2"x1/8" and 1/2"x3/32" Bicycle Chain
40 tooth bicycle chain sprocket. Nickel plated steel. Dimensions 6-5/8" OD, 2-1/8" ID. Five 5.1mm ID mounting holes. Mounts onto our 5-hole freewheels sold below. Compatible with both 1/2"x1/8" (#410) and 1/2"x3/32" bicycle chain.
Item # SPR-B40F

 $25.95


44 Tooth 2-1/8" Bore 5-Hole Sprocket for 1/2"x1/8" and 1/2"x3/32" Bicycle Chain
44 tooth bicycle chain sprocket. Black powder coated finish steel. Dimensions 7-1/8" OD, 2-1/8" ID. Five 5.1mm ID mounting holes. Mounts onto our 5-hole freewheels sold below. For 1/2"x1/8" (#410) and 1/2"x3/32" bicycle chain.
Item # SPR-B44F

 $29.95


48 Tooth 2-1/8" Bore 5-Hole Sprocket for 1/2"x1/8" and 1/2"x3/32" Bicycle Chain
48 tooth bicycle chain sprocket. Black powder coated finish steel. Dimensions 7-13/16" OD, 2-1/8" ID. Five 5.1mm ID mounting holes. Mounts onto our 5-hole freewheels sold below. For 1/2"x1/8" (#410) and 1/2"x3/32" bicycle chain.
Item # SPR-B48F

 $32.95


11 Tooth Freewheel Sprocket with 11mm Bore for 1/2"x1/8" Bicycle Chain
Motor sprocket for MY1018Z and MY1016Z3 gear motors. Motor shaft must rotate clockwise to use this sprocket. 1-15/16" (50mm) OD, 11mm ID, 4mm wide x 2mm deep keyway. Works with 1/2"x1/8" (#410) bicycle chain.
Item # SPR-B1111FW

Compatible with our 250-450 Watt gear motors.
 $21.95

12 Tooth Freewheeling Sprocket for 1/2"x1/8" (#410) Bicycle Chain (Right Side)
Roller clutch sprocket with one-way bearing. Rotates freely in one direction; fixed in other direction. 12 tooth sprocket for 1/2"x1/8" (#410) bicycle chain. Fits 18mm threaded hub or shaft. Right hand clockwise threads. Sprocket OD: 54mm. Overall length of sprocket: 25mm. M18x1.00 right-hand threads.
Item # SPR-41012F		 $13.95


12" Long Electric Scooter and Bike Battery Pack Jumper Cable with 5mm Insulated Ring Terminals
Twelve inch long battery pack jumper cable with top and side insulated 5mm ID ring terminal connectors. Tethered top insulator cap has a small hole in it for battery testing access. These premium battery cables are made with high temperature silicone coated, fabric jacketed, vinyl insulated 12 gauge stranded copper wire.
Item # CNX-180

 $3.95

Scooter Hazard Light Switch

Scooter Hazard Light Switch
Scooter hazard light switch. For full size street legal electric scooters, bikes, and mopeds. Built-in three terminal connector on back side of switch.
Item # SWT-640		 $4.95

Scooter Horn Switch with

Scooter Horn Switch
Scooter horn switch with orange button. For full size street legal electric scooters, bikes, and mopeds. Built-in two wire terminal connector.
Item # SWT-652		 $4.95


12-1/2x3.0 Knobby Tread Electric Scooter Tire
Heavy-duty knobby tread 12-1/2"x 3.0" electric scooter tire. Maximum recommended inflation pressure 35 PSI. Made by Innova®. This tire is sometimes marked: 12.5x3.0
Item # TIR-1255		 $16.95

12 Volt
 250 Watt

12V 250W Electric Scooter/Bicycle Speed Controller
Designed for 12 Volt motors up to 250 Watts. Maximum current 30 Amps. Under Voltage protection 10 Volts. Current limiting feature prevents controller and motor damage due to over-current conditions. Under voltage protection feature prevents over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle.
Item # SPD-12250
Wiring Directions		 $24.95


 

Handlebar End Safety Lights
Set of two black anodized CNC machined billet aluminum handlebar end lights. 240° wide viewing angle. Each light has two super bright red LED lights inside of it with a translucent silicone lens. Press the lens once for flashing red light, twice for continuous red light, and a third time to turn the light off. Both lights can be turned on at the same time as safety lights or they can be individually turned on and off as needed for turn signals. Fits virtually all electric scooter and bike handlebars. Minimum handlebar ID that they will fit is 16mm and maximum is 23mm. The aluminum bezel unthreads from the aluminum base for easy battery replacement. Each handlebar end light uses two AG10 battery (batteries are included)
Item # LIT-101		 $5.95



35 PSI Air Pressure Monitor Valve Cap Set
Color changing air pressure monitor valve stem caps. Color indicator changes from solid green to green and yellow and then to green, yellow and red when the air pressure drops below 35 PSI. Base is made from nickel plated CNC machined solid brass. Pressure indicator with clear cover is made from high impact thermoplastic. Low tire pressure is the leading cause of tire and tube failure so this valve stem cap set could pay for itself the first time it detects low air pressure in the tires. This set includes two valve stem caps.
Item # VCP-035		 $3.95

 		28.8mm (1-1/8") OD Currie Electric Scooter Seat Tube
Steel seat tube for 25.4mm (1") OD seat posts. 25.4mm (1") ID x 28.8mm (1-1/8") OD. Seat tube for Currie®, IZIP®, Schwinn®, Mongoose®, and GT® electric scooters with 28.8mm seat tube mounting hole. Includes seat post clamp. Has hanger and mounting bolts for a wire basket plus threaded holes and mounting bolts for a water bottle holder.
Overall length: 15-1/2"
Dimensions: 394mm long x 28.8mm OD
Item # SPT-300		 $19.95


Motor for eZip and IZIP Electric Bicycles and Currie Electro-Drive Kits
24V 450W electric bicycle motor with built-in gear reduction transmission. Output shaft speed is 470 RPM. Includes 9 tooth sprocket for 1/2" x 1/8" bicycle chain. 11 and 13 tooth sprockets are available for this motor. Output shaft is 11mm OD with a 4mm wide x 2mm deep keyway. Powerful four brush permanent magnet design. 100% ball bearing construction. 24" long power leads. Shaft rotation reversible by reversing power leads. Motor dimensions: 4-1/4" outside diameter x 3-1/2" long excluding transmission and output shaft, 4-1/2" long including transmission and output shaft. OEM Currie® motor.
Item # MOT-CTE24450GX470 		$129.95


24 Volt 500 Watt 2600 RPM Currie Electric Scooter Motor with 15 Tooth Freewheel Sprocket
24VDC 500W 2600 RPM electric scooter motor. Rated current 28A. Powerful four brush permanent magnet electric motor design with 100% ball bearing construction. 15 tooth freewheel sprocket for #25 chain. Shaft rotation spins counter clockwise if you are facing the shaft. Shaft rotation is reversible by reversing power leads. 12" long power leads with connector at end. 3 bolt mounting bracket measures 3-7/8" center to center distance between holes. Dimensions: 4"(H) x 4"(W) x 5-1/4"(L) including shaft. Weight 6.1 lbs. OEM Currie® motor.
Item # MOT-SD156FW
Compatibility: Currie, Schwinn, Mongoose, eZip, IZIP, and GT electric scooters.
Motor model: XYD-6D
$99.95


24 Volt 750 Watt 2600 RPM Currie Electric Scooter Motor with 15 Tooth Freewheel Sprocket
24VDC 750W 2600 RPM electric scooter motor. Rated current 38A. Powerful four brush permanent magnet electric motor design with 100% ball bearing construction. 15 tooth freewheel sprocket for #25 chain. Shaft rotation spins counter clockwise if you are facing the shaft. Shaft rotation is reversible by reversing power leads. 12" long power leads with connector at end. 3 bolt mounting bracket measures 3-7/8" center to center distance between holes. Dimensions: 4"(H) x 4"(W) x 5-1/4"(L) including shaft. Weight 6.6 lbs. OEM Currie® motor.
Item # MOT-SD175FW
Compatibility: Currie, Schwinn, Mongoose, eZip, IZIP, and GT electric scooters
Motor model: XYD-6D
$109.95


48 Volt 500 Watt 2500 RPM Electric Scooter Motor
48V 500W 2500RPM electric scooter motor. Powerful four brush permanent magnet design with 100% ball bearing construction. Includes 11 tooth sprocket for #25 chain. 8.5mm x 10mm sprocket mounting area. Different size sprockets are available for this motor. 18" long power leads. Shaft rotation reversible by reversing power leads. Dimensions: 4-1/4" wide x 5-1/2" long excluding shaft, 6-1/2" long including shaft. Shaft is 1" long and sprocket is spaced 5/8" away from front of motor. Front and rear ends of motor have threaded mounting holes. Made by Unite®. Weight 9 lbs.
Item # MOT-48500
Cross references motor case number: MY1020
$99.95


48 Volt 750 Watt 2800 RPM Electric Scooter Motor
48V 750W 2800RPM electric scooter motor. Powerful four brush permanent magnet design with 100% ball bearing construction. Includes 11 tooth sprocket for #25 chain. 8.5mm x 10mm sprocket mounting area. Different size sprockets are available for this motor. 18" long power leads. Shaft rotation reversible by reversing power leads. Dimensions: 4-1/4" wide x 5-1/2" long excluding shaft, 6-1/2" long including shaft. Shaft is 1" long and sprocket is spaced 5/8" away from front of motor. Front and rear ends of motor have threaded mounting holes. Made by Unite®. Weight 9 lbs.
Item # MOT-48750
Cross references motor case number: MY1020
$99.95


16x3.0 Street Tread Electric Scooter and E-Bike Tire
Chao Yang® brand street tread 16x3.0 electric scooter, moped, and e-bike tire. Has small knobs on side treads for improved traction during cornering. Medium duty 2-ply tire for lighter to medium weight electric scooters and bikes. Maximum inflation pressure 35 PSI.
Item # TIR-16X3.0V2		 $19.95


18x2.125 Street Tread Electric Scooter and E-Bike Tire
Chao Yang® brand street tread 18x2.125 electric scooter, moped, and e-bike tire. Has small knobs on side treads for improved traction during cornering. Maximum inflation pressure 35 PSI.
Item # TIR-18X2.125V1		 $19.95


18x2.5 Street Tread Electric Scooter and E-Bike Tire
Chao Yang® brand street tread 18x2.5 electric scooter, moped, and e-bike tire. Has small knobs on side treads for improved traction during cornering. Maximum inflation pressure 35 PSI.
Item # TIR-18X2.5V1		 $19.95


3 Pin House Charger Port with 2 Vertical and 1 Horizontal Pins
House shaped electric scooter and bike battery charger port with two vertical and one horizontal pins. Three .187" (3/16") quick connector or solder posts on back side of port.
Item # CNX-620

 $4.95


63 Amp Electric Scooter/Moped Circuit Breaker
63A toggle switch circuit breaker. Commonly used on larger street legal electric scooters, bikes, and mopeds. Cable clamp terminals on top and bottom sides of circuit breaker tighten with a Phillips screwdriver and accept stranded wire up to 5/16" OD (6 Gauge). DZ47-63 C63 circuit breaker.
Dimensions: 2-3/4" long x 7/16" wide x 3" high
Item # CBK-C63		 $11.95

48 Through 60 Volt 150 Amp Contactor
48V-60V DC 150A continuous duty SPST power contactor. Works with 48V and 60V battery packs. Normally open contacts rated at 150 Amps. Two 6mm (1/4") diameter contact mounting posts and two 4mm (1/8") diameter coil mounting posts. Mounting posts include flat washers, lock washers, and nuts. 2-7/16" wide steel mounting plate on back of solenoid with two 6mm (1/4") diameter mounting holes spaced 1-13/16" apart from center to center. All of our key switches, power switches, and handlebar switches can operate the coil of this contactor. Dimensions: 3-1/4" high x 2-9/16" wide x 2" deep
Item # RLY-60150
Wiring Directions		 $24.95


9 Tooth 8mm Bore Sprocket for #25 Chain
13/16" OD, 8mm ID. This sprocket attaches to the motor shaft with included 3mm x 20mm roll pin.
Item # SPR-2509P

 $7.95


12 Tooth 10mm Bore Sprocket for #25 Chain
1-1/16" OD, 10mm ID. This sprocket attaches to the motor shaft with included 3mm x 20mm roll pin.
Item # SPR-2512P

 $10.95


200x75 Street Tread Electric Scooter Tire
Heavy-duty thick rubber street tread electric scooter tire. 4-ply thickness rating. Maximum recommended inflation pressure 35 PSI.
Item # TIR-200X75		 $17.95


200x75 Bent Valve Electric Scooter Tube
200X75 electric scooter inner tube with bent valve stem.
Item # TUB-200X75		 $9.95


 

4 Wire 3 Position Key Switch with Handlebar Lock Pin and Two Trunk/Panel Locks
Key switch plus two trunk/panel locks with two keys for full size street legal electric scooters, bikes, and mopeds. Three position locked/off-on key switch. Key removable in locked and off position. 28mm center to center distance between mounting holes. Front black plastic bezel is removable for installation. 10mm round lock pin. Lock pin protrudes 2mm in unlocked position and 9mm in locked position.
Wire Length: 9 Inches
Wire Terminals: 6.3mm Male
Mounting Hole Dimensions: Click To View
Item # SWT-241

Wire Color Locked Position Off Position On Position
Red Off Off On
Black Off Off On
Green Off Off On
Black/White Off Off On
$29.95


1-3/4" OD Headset Cup and Bearing Set
Electric scooter and bicycle front forks headset bearing set with chrome plated finish.
For 1" (25.5mm) OD handlebar stem.
Cup: 1-3/4" (44mm) OD, 1-9/16" (40mm) ID
Seat: 1-3/8" (34mm) OD
Item # BRG-134C		 $11.95


24 Volt Battery Status, Power On, and Headlight On Indicator
Handlebar mount 24 Volt battery status, power on, and headlight on indicator. Top; yellow light for 25% and three green lights for 50%, 75%, and 100% battery status. Bottom; red light for low battery warning, green light for power on, and yellow light for headlight on. 68" power cord. Red wire +24V power on, black wire ground, and white wire +24V headlight on. Fits standard 22mm (7/8") bicycle and scooter handlebars.
Item # MET-W24V		 $17.95

24 Volt
500 Watt

8 Connectors

36V 500W Speed Controller
Designed for 24 Volt motors up to 500 Watts. Maximum current 30 Amps. Under Voltage protection 31 Volts. Current limiting feature prevents controller and motor damage due to over-current conditions. Under voltage protection feature prevents over-discharge and extends battery life. Uses standard 3-wire variable speed hall-effect throttle. Mounting tabs on back side of controller.
Item # SPD-24500
Wiring Directions		 $39.95

LED Headlight

900 Lumen 3 LED 20-80 Volt Electric Scooter or Bicycle Headlight
Super bright 900 lumen 3 LED handlebar mount headlight for electric scooters and bikes. Operates between 20-80 Volts DC. Consumes 9 Watts of power. Brightness does not increase or decrease depending upon how much Voltage is applied to the headlight. 18" long power cable. Body and mounting clamp are made from machined aluminum.

Item # LIT-150

 $24.95


MAXI Fuse Holder with 6 Gauge Black Wire
Open top MAXI fuse holder with two wire leads. 6 AWG black power cable wire. Bakelite fuse holder housing. 1/4" ID mounting hole in middle of fuse holder.
Item # FUS-390		 $6.95


2 Wire 3 Position Key Switch with Handlebar Lock Pin
Key switch with two keys for full size street legal electric scooters, bikes, and mopeds. Three position locked/off/on key switch. Key removable in locked and off position. 50mm center to center distance between mounting holes.
Item # SWT-239

 $29.95

48 Volt
 350 Watt

Brushless

48V 350W Electric Scooter/Moped/Bike Brushless Motor Speed Controller
Designed for 48 Volt DC brushless motors between 200 and 350 Watts. Under Voltage protection 42 Volts. Compatible with standard 3-wire variable speed hall-effect throttles.

Dimensions: 5-1/8" L x 2-3/4" W x 1-1/4" T
Item # SPD-48350BRUSHLESS

Wiring Directions

 $59.95

48 Volt
1500 Watt

48V 1500W Electric Scooter Speed Controller
Designed for 48 Volt DC electric scooter and bike motors up to 1500 Watts. Recommended motor size 1000W-1500W. Can be used to power two 500W-750W motors simultaneously. Maximum current 45 Amps. Under Voltage protection 41 Volts. Compatible with all standard 3-wire variable speed hall-effect throttles.
Item # SPD-481500
Wiring Directions		 $79.95


Full Length Twist Throttle with Matching Grip for 1" Handlebars
Standard full length throttle with matching grip for large street legal Chinese-made electric scooters. Fits 1" (24.5mm) handlebars. Wire colors: black, red, and white. 18" long throttle cable with female terminals and white connector. Wire connector mates with connector item # CNX-52.
Item # THR-154
Wiring Directions

Replaces throttles with different wire colors:
Service Bulletin

 $24.95

36 Volt
800 Watt

36 Volt 800 Watt Electric Scooter Speed Controller
Designed for 36 Volt motors up to 800 Watts. Maximum current 32 Amps. Under Voltage protection 31 Volts. Compatible with all standard 3-wire variable speed hall-effect throttles.
Item # SPD-36800B
Wiring Directions		 $49.95



Rear Rim for 9x3.50-4 or 10x3.00-4 Tires
Rear aluminum alloy electric scooter rim for 9x3.5-4 or 10x3.00-4 tires and tubes. Two piece split rim design for easy tire installation. Hub has three threaded hole on one side for a chain sprocket, and is threaded on the other side for a band brake. Rim is 2-3/4" wide x 4-7/8" high. Hub is 4-1/4" wide. Two pre-installed wheel bearings - one 6001Z and one 6001RS wheel bearing. The wheel bearings installed on this rim are for 10mm diameter axles.
Weight: 1.2 lbs.
Item # WHL-9x3.5-4R-V2		 $27.95

24V 450W
for chain drive scooters

 24 Volt 450 Watt 2400 RPM Currie Electric Scooter Motor With 11 Tooth Sprocket
24VDC 450W 2400RPM electric scooter motor. Rated current: DC24V 28A. Powerful four brush permanent magnet electric motor design with 100% ball bearing construction. 11 tooth sprocket for #25 chain. Shaft rotation spins CCW if you are facing the shaft. 14" long 12AWG power leads with connector at end. Bottom mounting plate has 4 holes that measure 3-3/4" x 1-5/8 center to center distance between holes.  Dimensions: 4-1/4"(H) x 4"(W) x 4-3/8"(L) including shaft and sprocket. Weight 6 lbs.
Item # MOT-SD152		 $89.95


32 Amp Electric Scooter/Moped Circuit Breaker
32A circuit breaker. Commonly used on larger street legal type electric scooters and mopeds. Cable clamp terminals on top and bottom side of circuit breaker. DZ47-63 C32 circuit breaker.
Dimensions: 2-3/4" long x 7/16" wide x 3" high
Item # CBK-C32		 $11.95


16x2.5 All-Terrain Tread Electric Scooter and Bike Tire
Heavy duty all-terrain tread 16x2.5" electric scooter or electric bicycle tire. Maximum recommended tire inflation pressure 40PSI.
Item # TIR-16X2.5		 $24.95


3 Pin Black Nylon XLR Port with Cover
Black nylon 3 pin XLR electric scooter/bike battery charger port with dust cover. Cover swings out of the way for charging and covers port when charging is complete. Solder connection posts on back side of connector.
Item # CNX-XLR05

 $3.95



Full Length Twist Throttle with 24 Volt Power Meter
Twist throttle with 24 Volt power meter for Chinese-made electric: scooters, bicycles, go karts, dirt bikes, ATV's, quads, pocket bikes, and mini choppers. Five LED battery indicator lights: red for power-on, yellow and green for 24 Volt battery pack status. Red, blue, green, and yellow wires with male connector pins for white wire connectors. 46" long throttle cable. Includes matching left hand side grip. Replaces throttles with different wire colors.
Item # THR-105
Wiring Directions
Service Bulletin 		$24.95



Full Length Twist Throttle with 48 Volt Power Meter
Twist throttle with 48 Volt power meter for Chinese-made electric: scooters, bicycles, go karts, dirt bikes, ATV's, quads, pocket bikes, and mini choppers. Five LED battery indicator lights: red for power-on, yellow and green for 48 Volt battery pack status. Red, blue, green, and yellow wires with male connector pins for white wire connectors. 46" long throttle cable. Includes matching left hand side grip. Replaces throttles with different wire colors.
Item # THR-115
Wiring Directions
Service Bulletin 		$24.95


"When you need Electric Scooter Parts, go to: ElectricScooterParts.com"

 

Store Polices | Electric Scooter Repair Help | Dealer Discounts | Feedback | About Us

 

We Ship Internationally

             
Copyright© 2002-2020 by ElectricScooterParts.com, an Electricruz Inc. company. All rights reserved.